40% OFF EVENT The promotional price is already applied. No code needed. LIMITED TIME
In stock SKU: I692723-N

Musictoner

Lab Gruppen PD3000 Two-Channel 3000-Watts Power Amplifier with SM-GO Power Management

$371.40

Deliver Massive Output with the Lab Gruppen PD3000 Two-Channel Power Amplifier The PD3000 is a two-channel amplifier delivering 2 x 1,500W of power for entry/mid-level live sound applications. PD Series amplifiers employ Lab Gruppen’s unique IDEEA Class-D output stage that is ideally...

Choose your gear Options and quantity
Secure checkoutEncrypted Shopify payment
Expert guidanceHelp before you order
Shipping detailsDetails vary by product

PRODUCT DETAILS

Everything you need to know.


Deliver Massive Output with the Lab Gruppen PD3000 Two-Channel Power Amplifier

The PD3000 is a two-channel amplifier delivering 2 x 1,500W of power for entry/mid-level live sound applications. PD Series amplifiers employ Lab Gruppen’s unique IDEEA Class-D output stage that is ideally matched to the rated power output. To provide flexibility, each channel offers sufficient voltage swing and current capacity to drive loads in any impedance without any additional configuration. In order to have low thermal losses as well as a high voltage swing, the design is based on a permanently bridged output.


  • Two channel amplifier delivering 2 x 1,500 Watts
  • Precise power management guarantees performance and efficiency
  • Proven and reliable Class-D amplifier stage
  • Highly efficient Switch Mode Power Supply (SMPS)
  • Speaker Protect Limiter for maximum level output and reliable driver protection
  • Accurate 8-segment Signal and Limit LEDs for performance monitoring
  • Integrated crossover with low-cut, high-cut and full range mode
  • Comprehensive circuit protection against short circuits, DC and thermal overload
  • Balanced XLR and TRS input connectors with optimised sensitivities
  • Industry standard twist-lock output connectors
  • Efficient cooling with temperature-controlled fan
  • Rugged and lightweight rack mount chassis for maximum durability


SPECIFICATIONS

  • Number of Amplifier Channels: 2
  • Peak Total Output All Channels Driven: 3000 W
  • Peak Output Voltage per Channel: 115 V
  • Peak Output Current per Channel: 32 A
  • Bridge Mode: No
  • Output Circuit Type: Class-D

Amplifier Outputs

  • 2 Ohms per Channel, Stereo: 1000 W
  • 4 Ohms per Channel, Stereo: 1500 W
  • 8 Ohms per Channel, Stereo: 800 W

Audio Performance

  • THD+N 20 Hz – 20 kHz @ 1 W: Less than 0.1%
  • THD+N @ 1 kHz, 1 dB below clip: Less than 0.1%
  • Signal-to-Noise: Greater than 90 dB
  • Channel Separation (Crosstalk) @ 1 kHz: Greater than 75 dB
  • Frequency Response: 10 Hz to 20 kHz, +0.5/ -1 dB
  • Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced
  • Distortion, 1/8 Rated Power: Less than 0.1%

System

  • Front Controls: Power switch, Gain controls (channels A and B)
  • Rear Controls: Stereo/mono switch, Switchable crossover: LF / full range / HF
  • Crossover Frequency: 100 Hz

Indicators

  • Power: RDY LEDs lit green
  • Limit (per channel): LIM LEDs lit red
  • Signal (per channel): -30 dB to -3 dB LEDs lit green/orange
  • Thermal Warning (per channel): RDY LED blink orange
  • Thermal Warning 90%, PSU: Both RDY LEDs blink orange
  • Thermal Fault (per channel): RDY LED blink red
  • Thermal Fault 100%, PSU: Both RDY LEDs blink red
  • Fault, Channel: RDY LED lit constantly red
  • Fault, Device: Both RDY LEDs constantly lit red

Connectors

  • Inputs / Link: 2 x XLR, 2 x 1/4-inch TRS
  • Outputs: 2 x twist-lock speaker connector (NLT4)
  • Mains Connector: Locking IEC appliance inlet, C14

Protection Features

  • Cooling: Two fans, front-to-rear airflow, temperature-controlled speed
  • Amplifier Protection: Thermal and DC protection, Rail sensing, Peak current limiting
  • Load Protection: Controlled start and shutdown behavior, DC-fault protection, Short-circuit protection

Power Supply

  • Voltage: Separate 230 V and 115 V versions (not selectable)
  • USA / Canada / Japan: 100–120 V, 50/60 Hz
  • UK / Australia / Europe / Korea / China: 220–240 V, 50/60 Hz
  • Power Consumption @ 4 Ohms: 1050 W

Dimensions / Weight

  • Dimensions (H x W x D): 93 x 483 x 326 mm (3.7 x 19 x 12.8 inches)
  • Weight: 6.5 kg (14.3 lbs)
  • Finish: Black painted aluminium chassis and grey front

Approvals

  • CE, cTUVus, PSE, RCM, CCC, FCC


Manufacturer: Lab Gruppen
Model: PD3000
SKU: I692723-N-0-WHXX
EAN: 4033653090315


We are Musictoner Musictoner

Since 1958, Chuck Levin’s Musictoner has been the trusted destination for musicians and audio professionals across Maryland, Virginia, and Washington, D.C. Family-owned and operated, our legendary music store delivers Everything in Music®—from instruments and recording gear to pro audio, rentals, and repair services.

Our team of musicians and industry experts lives and breathes gear, helping you build the perfect setup for your next performance, studio session, or installation. As an authorized dealer for top brands, we also offer our award-winning CHUCKSCLUSIVE line—exclusive, limited-edition instruments and collaborations recognized with the NAMM Top 100 Dealer Innovation Award for redefining what a music retail experience can be.

Chuck Levin’s isn’t just a store—it’s a community built by players, engineers, and creators who share a lifelong passion for sound. Stop by our legendary Wheaton, MD showroom or contact us anytime for expert advice, product questions, or the best possible deal on your next piece of gear.